Yi Feng Su Technical Senior Staff Member Contact SUY1@ORNL.GOV All Publications Assessing Stainless Steel Compatibility in Flowing FLiBe Salt Tailoring Binder Molecular Weight to Enhance Slurry-Cast NMC Cathodes for Sulfide Solid-State Batteries Corrosion Evaluation of Al-Cu-Mn-Zr Cast Alloys in 3.5% NaCl Solution Investigation of Chemical Species in the Corrosion Barrier Layer on Thermal CO2 Treated AZ91D Magnesium Alloy with Lithium Nitrate Effects of catholyte aging on high-nickel NMC cathodes in sulfide all-solid-state batteries Cost-Effective Thermomechanical Processing of Nanostructured Ferritic Alloys: Microstructure and Mechanical Properties Investigation Strength stability at high temperatures for additively manufactured alumina forming austenitic alloy Complete Optimization of LPBF Ni-Based Alloys Down-Selected from FY23 Candidate Materials Including, Thermodynamic Modeling, Sample Fabrication and Microstructure Characterization Advanced neutron absorber Ni-Cr-Mo-Gd alloys seawater corrosion mechanism and susceptibility study... Leveraging Additive Manufacturing to Fabricate High Temperature Alloys With Co-Designed Mechanical Properties and Environment... Effect of Cr content on the hydrothermal corrosion behavior of FeCrAl alloys Elucidating Polymer Binder Entanglement in Freestanding Sulfide Solid-State Electrolyte Membranes Lithium nitrate salt-assisted CO2 absorption for the formation of corrosion barrier layer on AZ91D magnesium alloy Performance Restoration of Iron Electrodes by Polarity Reversal after Long-Term Surface Fouling in Wastewater Electrocoagulat... Liquid metal compatibility of pre-oxidized FeCrAl in flowing Sn Characterization of Oxide Scales Formed on Fe-20Cr-(20-25)Ni Alloys in Supercritical CO2 Evaluation of coated steels in supercritical CO2 Open-air plasma-assisted deposition of organosilicon coating for corrosion protection of AZ91D Mg alloy... Multiscale characterization of an additively manufactured property graded Ni-base alloy for molten-salts\supercritical-CO2 heat exchangers Characterization and Electrochemical Analysis of Acidic Condensate-Induced Corrosion on Aluminized Coating on Steel in Residential Heaters Effects of Cr/Zircaloy-4 coating qualities for enhanced accident tolerant fuel cladding Internal carburization and scale formation on austenitic steels in supercritical carbon dioxide Characterization of Fe and Cr Dissolution and Reaction Product Formation in Molten Chloride Salts With and Without Impurities... LEVERAGING ADDITIVE MANUFACTURING TO FABRICATE HIGH TEMPERATURE ALLOYS WITH CO-DESIGNED MECHANICAL PROPERTIES AND ENVIRONMENTAL RESISTANCE Challenges in computationally designing high temperature Fe-based austenitic alloys: Addressing the role of Ni additions Pagination Current page 1 Page 2 Next page ›â¶Äº Last page Last » Key Links Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Corrosion Science and Technology Group
News Researchers demystify polymer binders to pave way for better sulfide solid-state electrolyte membranes
